Charging the Sunu Band

To charge your device, continue with the next steps:

1. Find the Micro-USB end of your charging cord and take a few seconds to locate the two bumps you feel on one of the sides; that side shall be facing the closest end of the device.
2. Connect that end into the Micro USB port until you feel a click.
3. Sunu Band should vibrate after 30 seconds that it’s plugged in.

Notes:

• The USB-end of your cable works with any electronic power adapter; you may use any power adapter at home.
• Make sure it’s tightly connected when it’s plugged.
• It takes about two hours to get fully charged.

Click here to learn how to Operate Your Device.